Torsional Stiffness Optimization in Heavy Commercial Vehicle Chassis Platforms: A Review of FEA-Based Design, Optimization Methods and Research Gaps |
Author(s): |
| Abhishek Deshmukh , Shree Ram Chandra college of Engineering, Lonikand, Pune; S. D. Shinde, Shree Ram Chandra college of Engineering, Lonikand, Pune; P. G. Sarasambi, Shree Ram Chandra college of Engineering, Lonikand, Pune |
Keywords: |
| Heavy Commercial Vehicle; Ladder Chassis; Torsional Stiffness; Finite Element Analysis; Surrogate Modelling; NSGA-II; Lightweight Design; Fatigue |
Abstract |
|
Heavy commercial vehicle (HCV) ladder chassis frames must carry payload, cab and powertrain loads while resisting severe twisting when wheels on opposite sides move vertically in opposite directions on unpaved or mining terrain. Insufficient torsional stiffness degrades handling, shifts steering geometry, overloads cross-member joints and accelerates fatigue cracking. This paper reviews finite element analysis (FEA), surrogate-assisted multi-objective optimization and experimental validation practice for thin-walled load-carrying structures (ladder chassis, crane, telehandler and forklift booms) and assesses its transferability to HCV chassis. Reported mass reductions from optimization of comparable structures range from 8.44% to 12.5%. A small-scale case study of a C40 mild-steel transmission shaft (Ø10 mm × 70 mm, 1470 N·mm) is used to demonstrate an analytical–numerical–experimental validation chain and its limitations. Eight research gaps are identified, including the scarcity of direct HCV chassis torsional optimization studies, simplified joint-contact modelling, omission of buckling and fatigue from the optimization loop, limited strain-gauge validation, and inconsistent dynamic load factors (1.15–1.5). A nine-step FEA-based optimization workflow addressing these gaps is proposed. |
Other Details |
|
Paper ID: IJSRDV14I90075 Published in: Volume : 14, Issue : 9 Publication Date: 01/12/2026 Page(s): 161-166 |
Article Preview |
|
|
|
|
